GPSrChive Discussion Forum

If the device was set to use MTP Mode it would enter that mode automatically when connected. If set to Garmin Mode, it would prompt the user to enter MTP when connected. Since it goes directly to the Map page, this indicates no USB data connection is detected by the device.

GPSrChive wrote: Thu Oct 26, 2023 1:36 pm If the device was set to use MTP Mode it would enter that mode automatically when connected. If set to Garmin Mode, it would prompt the user to enter MTP when connected. Since it goes directly to the Map page, this indicates no USB data connection is detected by the device.

Yes, I see that now having just tested it. I use a third party mapping software to create routes and my 67i is not visible to that software but is visible in windows file explorer. To export a route I have to export to a folder on my PC then drag that into the GPX folder on my Garmin.

You may want to read this post for an alternative solution.

GPSrChive wrote: Thu Oct 26, 2023 2:31 pm You may want to read this post for an alternative solution.

Thanks, some useful stuff in there.