Page 1 of 1
Can't power on [Bug 54]
Posted: Sat May 25, 2019 6:41 pm
by gruen
I can't power on the GPSMAP 66 after disconnecting the USB cable when I have Pressure Trending set to "Save Always" and use USB data transfer longer than 10 minutes.
For power on I must reconnect USB power and press multiple the power on button.
Re: Can't power on [Bug 54]
Posted: Sat May 25, 2019 8:39 pm
by GPSrChive
Firmware Version?
Re: Can't power on [Bug 54]
Posted: Sat May 25, 2019 9:28 pm
by gruen
2.80 and 3.00
Re: Can't power on [Bug 54]
Posted: Sat May 25, 2019 11:59 pm
by GPSrChive
Thank you!
Posted as Bug 54 in Common Issues page.
Re: Can't power on [Bug 54]
Posted: Sat Jul 06, 2019 3:22 am
by g66
Sometimes in expedition mode with v3.00 - i also cannot power on the unit.
3.10 is not avaliable in my country.
It would be great, if expedition mode automatically does not start after 2 minutes.
Better way would be automatically expedition mode starts after a user selected time between 2 and 20 minutes.
After expedition mode was on, all satellites are lost, and i have to use gps off and on again to find satellites
This happens every time, the unit is awaked from expedition mode
Is this a software bug, or do i have to send my unit to garmin
Re: Can't power on [Bug 54]
Posted: Wed Jul 10, 2019 3:50 am
by g66
With 3.10 and!! Gps fw 2.60
Expedition mode is now working fine after wake up - unit can now find a fix after wake up from expedition mode
With 3.10 and gps 2,50, the unit could not find any satellite after wake up from expedition mode
Re: Can't power on [Bug 54]
Posted: Wed Jul 10, 2019 5:28 am
by GPSrChive
Thank you G66 for the update!