Page 1 of 1

Oregon 700 No wifi Scan

Posted: Sun Aug 16, 2020 9:56 am
by pschonmann
Hi ! I have an issue with O700.
1, Tried to find a network in my neighborhood , but failed. I cant see no wlan.
But when I add wifi manually in garmin express, it connects.
There is a video about my situation https://www.youtube.com/watch?v=-JaGG4l ... e=youtu.be
Trying to find network
Saved wifi - wlan - connected
Saved wifi - uzasnazemeplocha ( password with "_" see below ) cant connect.
Tried reset in menu
Even hard reset with user button when booting.
No change.
When connected, sometimes weather app say that need internet.
Wifi ison supported channel.
I see lots of 2.4ghz on my phone, but oregon cant see no wlan


2, In czech keyboard im missing character "_" that im using in wifi password
It cant be added directly on keyboard, but garmin express can solve this problem.

Re: Oregon 700 No wifi Scan

Posted: Sun Aug 16, 2020 12:27 pm
by GPSrChive
There are some cases where Wi-Fi cannot be configured on the device, such as you have discovered, and setup via Garmin Express is required.

Which firmware version is your Oregon 7x0 running?

Re: Oregon 700 No wifi Scan

Posted: Sun Aug 16, 2020 2:36 pm
by pschonmann
Im using 5.00

Re: Oregon 700 No wifi Scan

Posted: Wed Aug 19, 2020 8:25 am
by pschonmann
Tried to downgrade via gcd update to lower versions, no change
Tried to remove/rename Garmin folder, no change.

Probably this settings is not affecting config files in filesystem, but some hidden config.

WIFI was working fine and working fine for first days when i bought gps from first owner. when i manually connect via garmin express wifi is working fine

Re: Oregon 700 No wifi Scan

Posted: Wed Aug 19, 2020 12:39 pm
by GPSrChive
May be a hardware issue, and you might have to contact Garmin about that. I do not believe this is a software issue as others with same firmware do not exhibit the same issue. I'm afraid there is little more we can help you with. Please do let us know how Garmin resolves this for you.

Re: Oregon 700 No wifi Scan

Posted: Thu Sep 25, 2025 12:00 am
by Wojtas81
I have same issue, but it occasionally works.

When I power off/power on device, then go to WiFi scan, then back and forth it sometimes finds plenty of networks.
When it find networks, I can connect to anyone.

Of course I can also connect manually through Garmin Express, but I have to manually provide SSID, password and select WPA2 (usually).

Despite WiFi scanning issue, everything is working fine. When my SSID is already saved, it connects to it without issues. Weather also updates properly through WiFi.