Routes with >50 points are stuck at 0% instead of error message?

Discussion related to the Garmin Montana 7x0 series GPSr
Forum rules
Post Reply
ConiKost
Posts: 954
Joined: Sat Jan 16, 2021 4:08 pm

Routes with >50 points are stuck at 0% instead of error message?

Unread post by ConiKost »

Did anyone also noticed, that loading a route with more than 50 points results in calculation stuck at 0% forever instead displaying an error message, that more than 50 points are not supported? Firmware 19.20.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.20, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
Top
Przekątny
Posts: 151
Joined: Fri Apr 07, 2023 9:30 pm

Re: Routes with >50 points are stuck at 0% instead of error message?

Unread post by Przekątny »

This is the case in all devices, the route determined by roads is limited to 50 intermediate points.
Top
ConiKost
Posts: 954
Joined: Sat Jan 16, 2021 4:08 pm

Re: Routes with >50 points are stuck at 0% instead of error message?

Unread post by ConiKost »

Przekątny wrote: ↑Sun May 05, 2024 11:38 am This is the case in all devices, the route determined by roads is limited to 50 intermediate points.
Eh? Shouldn't be there instead an error message, which indicates that instead of hanging forever at 0%?
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.20, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
Top
Przekątny
Posts: 151
Joined: Fri Apr 07, 2023 9:30 pm

Re: Routes with >50 points are stuck at 0% instead of error message?

Unread post by Przekątny »

ConiKost wrote: ↑Sun May 05, 2024 7:10 pm Eh? Shouldn't be there instead an error message, which indicates that instead of hanging forever at 0%?
Should......
On some devices, a message reads:
‘Onil 50 points can be used for road navigation
or with similar content.
Top
Post Reply

Return to “Montana 7x0”