Page 1 of 2
H1 Map scale dimensions
Posted: Fri Sep 12, 2025 10:44 pm
by Przekątny
Could someone measure and post on the forum how many millimeters the scale (line) under the zoom value is?
This question may seem a bit strange. I know the line size is fixed, but it's information I often use when hiking.
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 1:06 am
by GPSrChive
The display is 47mm wide with 282 pixels per line.
The Map page 'Scale' bar is exactly 50 pixels wide.
My calculations put the 'Scale' bar at about 8.3mm wide.
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 7:02 am
by Przekątny
Thank you, the information will help me evaluate the map display in the map screenshots provided.
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 11:33 am
by JungleJim
I put a ruler alongside the scale bar, and it measures at a bit more than 6mm wide. So that would mean that the bar is less than 50 pixels wide...
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 11:57 am
by Przekątny
The GPSrChive measurement seems likely to me, with a screen the size of GPSmap 67 and Oregon, we can assume 8 mm. The H1 has a slightly larger screen, so the line may have a different size.
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 12:06 pm
by JungleJim
GPSrChive did not measure, he made a calculation
I measured the width on my GPSMAP H1, and the width is just a bit more than 6mm (as in between 6 and 6.5mm).
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 12:15 pm
by Przekątny
A difference of tenths of a millimeter doesn't matter much to me, but a millimeter or two does. I use the line length to establish a factor that allows me to quickly estimate distances at different magnification levels.
Added:
I know there's a distance measurement option, but you have to stop to measure, and it takes a while. Having the coefficient after looking at the screen (at different zooms) allows me to quickly assess the distance to an object on the map.
Another solution could be used, such as a transparent map with a kilometer grid, which makes it easier to estimate distances.
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 5:33 pm
by GPSrChive
JungleJim wrote: Sat Sep 13, 2025 12:06 pm
GPSrChive did not measure, he made a calculation
I measured the width on my GPSMAP H1, and the width is just a bit more than 6mm (as in between 6 and 6.5mm).
Measure Twice, Cut Once!
OK, so closer to 7.8mm

Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 5:40 pm
by GPSrChive
JungleJim wrote: Sat Sep 13, 2025 11:33 am
I put a ruler alongside the scale bar, and it measures at a bit more than 6mm wide. So that would mean that the bar is less than 50 pixels wide...
EXACTLY 50 pixels wide.
Re: H1 Map scale dimensions
Posted: Sat Sep 13, 2025 5:46 pm
by GPSrChive
GPSrChive wrote: Sat Sep 13, 2025 1:06 am
The display is 47mm wide with 282 pixels per line.
The Map page 'Scale' bar is exactly 50 pixels wide.
My calculations put the 'Scale' bar at about 8.3mm wide.
After recalculating based on the 46 pixels 'between' the scale bar uprights...
The display is 47mm wide with 282 pixels per line. This is precisely 6 pixels per mm.
46 pixels wide / 6 pixels per mm = 7.66mm.
So, more precisely, the scale should measure 7.66mm wide,
inside the brackets.